HOME

General Purpose Test Probes GKS 050

Mounting and Functional Sizes
Dimensions in Millimeters



GKS-050





GKS-050 ... L





KS-050 E08





KS-050 E08 V-30





KS-050 30 E08





SE-050

KS-050 35 E08





KS-050 47 E08



Plug:
The plugs SE-050 and SE-050 V-30 should be used with Receptacle KS-050 35 E08

SE-050 V-30:
The plug is ready-wired with AWG 30 (green) wire. The connection is soldered. An insulation prevents short circuits.

Tools:
A list of insertion and extraction tools for GKS and KS is available upon request.



50 thou grid. For SMD technology, features high stability, low "wobble" and greater accuracy. Nominal current: 2 to 3 Amp, typical resistance: ‹ 20 mOhm, spring force at operating stroke: 1.5 Newton (alternatives available: 1.0 N and 2.0 N), recommended minimum centers: 1.27 mm (50 thou), mounting hole size: 0.96-0.98 mm in CEM 1; 0.97-0.99 in FR 4, test pad size: 0.8 mm (0.6 mm with guide plate), operating stroke: 4.3 mm (6.35 mm maximum). Materials. Barrel: CuBe hardened, gold plated. Spring: spring-steel, gold plated. Plunger: CuBe or steel, gold plated. Receptacle: CuBe, gold plated.

Available Tip Styles
Illustration, designation, tip materials, diameter, and order part number



	"31"	Steel with Gold plating, 0.50mm GKS 050 231 050 A 15 00
	"91"	Steel with Gold plating, 0.50mm GKS 050 291 050 A 15 00
	"07"	CuBe with Gold plating, 0.50mm GKS 050 307 050 A 15 00
	"07"	CuBe with Gold plating, 0.90mm GKS 050 307 090 A 15 00
	"14"	Steel with Gold plating, 0.50mm GKS 050 214 050 A 15 00
	"06"	CuBe with Gold plating, 0.90mm GKS 050 306 090 A 15 00
	"05"	CuBe with Gold plating, 0.50mm GKS 050 305 050 A 15 00



E-Type Probe GKS-050 ... K
Please see Technical Information



"91"

Steel with Gold plating, 0.50mm GKS 050 291 050 A 15 00 K



Special design GKS-050 ... L



"91"

Steel with Gold plating, 0.50mm GKS 050 291 050 A 15 00 L


Visit the Tip Style Descriptions Page for explanations on each tip style.



Collar Height and Extension Height To regulate the Extension Height, Receptacles with a Press Ring are used. The Receptacles can be inserted either up to the Press Ring or by pushing the Press Ring into the bore.



Return to Test Probe Selection or Tip Style Descriptions or Test Probe Features or the Ingun (UK) Home Page





UK and International Orders: Ingun (UK) Ltd, Victoria House, Desborough Street, High Wycombe, Buckinghamshire, HP11 2NF, UK, Tel: +44(0)1494 601096 Fax: +44(0)1494 601097 E-mail: probe@ingun.co.uk

Copyright 2004 Ingun (UK) Ltd Created and Maintained by Cyberpoint Limited Search Engine Promotion by FirstFound