HOME

General Purpose Test Probes GKS 187

Mounting and Functional Sizes
Dimensions in Millimeters



GKS-187 Probe complete with KS-187 Receptacle





GKS-187 Probe





Lamellar Plug LS-187 without wire LS-187 V with AWG-26 wire LS-187 V-30 with AWG-30 wire

KS-187 EO8 Receptacle for Lamellar Plug





KS-187 47 EO8 Receptacle with Wire Wrap Post

DS-187 02



Please Note. Test Probe 187 can only be used in combination with a receptacle, as detailed above. Alternative ready-wired receptacle configurations are:
KS-187 EO8 V with AWG-26 wire
KS-187 EO8 V-30 with AWG-30 wire
KS-187 E08 TP with Twisted Pair wire

50 thou grid. For SMD technology, features high stability, low "wobble" and greater accuracy. Nominal current: 1 to 1.5 Amp, typical resistance: 20 mOhm, standard spring force: 1.0 Newton (alternatives available: 0.8 N, 1.3 N and 2.3 N), recommended minimum centers: 1.27 mm (50 thou), recommended mounting hole size: 1.0 mm, minimum test point size: 0.8 mm (0.6 mm with guide plate), recommended operating stroke: 5.0 mm (6.35 mm maximum). Materials. Barrel: gold plated nickel silver. Spring: gold plated steel. Plunger: beryllium copper or gold plated steel or nickel plated steel. Receptacle: gold plated nickel silver.

Available Tip Styles
Illustration, designation, tip materials, diameter, and order part number



	"09"	Steel with Nickel plating, 0.50mm GKS 187 209 050 N 10 00
	"09"	Steel with "Aurun" plating, 0.50mm GKS 187 209 050 G 10 00
	"91"	Steel with Nickel plating, 0.80mm GKS 187 291 080 N 10 00
	"01"	CuBe with Gold plating, 0.80mm GKS 187 201 080 A 10 00
	"33"	CuBe with Gold plating, 0.80mm GKS 187 333 080 A 10 00
	"04"	CuBe with Gold plating, 0.80mm GKS 187 304 080 A 10 00
	"07"	CuBe with Gold plating, 0.80mm GKS 187 307 050 A 10 00
	"06"	CuBe with Gold plating, 0.80mm GKS 187 306 080 A 10 00
	"06"	CuBe with Gold plating, 1.00mm GKS 187 306 100 A 10 00
	"03"	CuBe with Gold plating, 0.80mm GKS 187 303 080 A 10 00
	"05"	CuBe with Gold plating, 0.80mm GKS 187 305 080 A 10 00


Visit the Tip Style Descriptions Page for explanations on each tip style.



Collar Height and Extension Height Receptacles with various collar heights are available to adjust the extension height of the tip. Collar Height 00 = Standard Probe as supplied Collar Height 03 = Extension Height of 10.5 mm Collar Height 05 = Extension Height of 13.0 mm Collar Height 08 = Extension Height of 16.0 mm To order a probe with an alternative collar height, substitute the "00" at the end of the probe Order Part Number with the collar height code above.



Return to Test Probe Selection or Tip Style Descriptions or Test Probe Features or the Ingun (UK) Home Page





UK and International Orders: Ingun (UK) Ltd, Victoria House, Desborough Street, High Wycombe, Buckinghamshire, HP11 2NF, UK, Tel: +44(0)1494 601096 Fax: +44(0)1494 601097 E-mail: probe@ingun.co.uk

Copyright 2004 Ingun (UK) Ltd Created and Maintained by Cyberpoint Limited Search Engine Promotion by FirstFound