Ingun UK - Test Probes

HOME

General Purpose Test Probes
GKS 191

Mounting and Functional Sizes

Dimensions in Millimeters

GKS-191 Probe complete with KS-191 Receptacle

GKS-191 Probe

SE-191 Plain Plug
Lamellar Plug can also be used:
LS-187 without wire
LS-187 V with AWG-26 wire
LS-187 V-30 with AWG-30 wire

KS-191 EO8 Receptacle for Plug

KS-191 47 EO8 Receptacle with Wire Wrap Post

KS-191 47 EO2/EO5 Receptacle with Wire Wrap Post

KS-191 EO8 V

KS-191 EO8 V-30

KS-191 E08 TP

75 thou grid. For SMD technology, features high stability, low "wobble" and greater accuracy. Nominal current: 1 to 1.5 Amp, typical resistance: 20 mOhm, standard spring force: 1.5 Newton (alternatives available: 0.8 N and 2.3 N), recommended minimum centers: 1.91 mm (75 thou), recommended mounting hole size: 1.32 mm, minimum test point size: 0.8 mm (0.6 mm with guide plate), recommended operating stroke: 5.0 mm (6.35 mm maximum). Materials. Barrel: gold plated nickel silver. Spring: gold plated steel. Plunger: beryllium copper or gold plated steel or nickel plated steel. Receptacle: gold plated nickel silver.

Available Tip Styles

Illustration, designation, tip materials, diameter, and order part number

	"09"	Steel with Nickel plating, 0.50mm GKS 191 209 050 N 15 00
	"09"	Steel with Gold plating, 0.50mm GKS 191 209 050 A 15 00
	"91"	Steel with Nickel plating, 1.00mm GKS 191 291 100 N 15 00
	"91"	Steel with Gold plating, 1.00mm GKS 191 291 100 A 15 00
	"14"	CuBe with Gold plating, 1.30mm GKS 191 314 130 A 15 00
	"04"	Steel with Gold plating, 1.30mm GKS 191 204 130 A 15 00
	"07"	CuBe with Gold plating, 1.00mm GKS 191 307 100 A 15 00
	"07"	CuBe with Gold plating, 1.30mm GKS 191 307 130 A 15 00
	"06"	CuBe with Gold plating, 1.00mm GKS 191 306 100 A 15 00

Visit the Tip Style Descriptions Page for explanations on each tip style.

Collar Height and Extension Height
Receptacles with various collar heights are available to adjust the extension height of the tip.

Collar Height 00 = Standard Probe as supplied
Collar Height 02 = Extension Height of 10.5 mm (Only available as KS-191 47 E 02)
Collar Height 05 = Extension Height of 13.0 mm (Only available as KS-191 47 E 05)
Collar Height 08 = Extension Height of 16.0 mm

To order a probe with an alternative collar height, substitute the "00" at the end of the probe Order Part Number with the collar height code above.

Return to Test Probe Selection or Tip Style Descriptions or Test Probe Features or the Ingun (UK) Home Page

UK and International Orders:
Ingun (UK) Ltd, Victoria House, Desborough Street, High Wycombe, Buckinghamshire, HP11 2NF, UK,
Tel: +44(0)1494 601096 Fax: +44(0)1494 601097
E-mail: probe@ingun.co.uk