Ingun UK - Test Probes

HOME

High Frequency Test Probes
HFS 110

Mounting and Functional Sizes

Dimensions in Millimeters

HFS-110 Type A, with plug connection

SE-110 ready wired with 0.75 m tail (special lengths on request)

Outer Plunger Type -06

HFS-110 Type B, with solder connection

KS-110 23 receptacle

Coaxial Dipole test probe Dual spring loaded. Applications: separate voltage/current measurement, 4-pole measurement, HF technology. Impedance: 50-60 Ohm/200 MHz, HF cable: RG178, B/U: Impedance 50 Ohm, 96 pF/m. Nominal current: 1 to 2 Amp, typical resistance: 20 mOhm, standard spring force: 4 Newton, recommended minimum centers: 4.50 mm (180 thou), recommended mounting hole size: 3.50 mm, recommended operating stroke: 4.0 mm (5.0 mm maximum). Materials. Inner Conductor: Barrel: gold plated brass. Spring: gold plated steel. Plunger: gold plated beryllium copper. Outer Conductor: Barrel: gold plated steel. Spring: gold plated steel. Plunger: gold plated beryllium copper. Insulation: Teflon, operating temperature -40 to +120 degree C.

Available Tip Styles

Illustration, designation, tip materials, diameter, and order part number

	"01"	CuBe with Gold plating, 0.50mm HFS 110 301 050 A 40 02/06 A/B
	"02"	CuBe with Gold plating, 0.50mm HFS 110 302 050 A 40 02/06 A/B
	"03"	CuBe with Gold plating, 1.15mm HFS 110 303 115 A 40 02/06 A/B
	"04"	CuBe with Gold plating, 1.15mm HFS 110 304 115 A 40 02/06 A/B
	"05"	CuBe with Gold plating, 1.15mm HFS 110 305 115 A 40 02/06 A/B
	"06"	CuBe with Gold plating, 1.15mm HFS 110 306 115 A 40 02/06 A/B
	"08"	CuBe with Gold plating, 1.15mm HFS 110 308 115 A 40 02/06 A/B

Visit the Tip Style Descriptions Page for explanations on each tip style.

Return to Test Probe Selection or Tip Style Descriptions or Test Probe Features or the Ingun (UK) Home Page

UK and International Orders:
Ingun (UK) Ltd, Victoria House, Desborough Street, High Wycombe, Buckinghamshire, HP11 2NF, UK,
Tel: +44(0)1494 601096 Fax: +44(0)1494 601097
E-mail: probe@ingun.co.uk