Ingun UK - Test Probes

HOME

Pneumatic Test Probes
PKS 220

Mounting and Functional Sizes

Dimensions in Millimeters

PKS-220 Type A

KS-220

PKS-220 Type B

KL-300

140 thou grid. Pneumatic Test Probes. Nominal current: 2 to 3 Amp, typical resistance: 30 mOhm, contact force at recommended operating stroke: 0.8 Newton, recommended minimum centers without receptacles: 2.54 mm (100 thou), with receptacles: 3.50 mm (140 thou), recommended mounting hole size without receptacles: 2.20 mm, with receptacles: 3.00 mm, recommended operating stroke: 6.0 mm (10.0 mm maximum), operating medium: compressed air (filetered, oil-free), recommended operating pressure: 6 bar. Materials. Barrel: gold plated brass. Restoring spring: gold plated steel. Plunger: beryllium copper or steel with gold, rhodium or nickel plate. O-rings: perbunan, heat-resistant up to 90 degree C.

Available Tip Styles

Illustration, designation, tip materials, diameter, and order part number

	"01"	Steel with Rhodium plating, 1.30mm PKS 220 201 130 R 08 02 A/B
	"01"	Steel with Rhodium plating, 1.50mm PKS 220 201 150 R 08 02 A/B
	"03"	CuBe with Rhodium plating, 2.00mm PKS 220 303 200 R 08 02 A/B
	"04"	Steel with Rhodium plating, 1.30mm PKS 220 204 130 R 08 02 A/B
	"05"	Steel with Gold plating, 1.00mm PKS 220 205 100 A 08 02 A/B
	"06"	Steel with Rhodium plating, 2.00mm PKS 220 206 200 R 08 02 A/B
	"06"	Steel with Gold plating, 2.50mm PKS 220 206 250 A 08 02 A/B
	"07"	Steel with Rhodium plating, 2.00mm PKS 220 207 200 R 08 02 A/B
	"91"	Steel with Nickel plating, 1.00mm PKS 220 291 100 N 08 02 A/B

Visit the Tip Style Descriptions Page for explanations on each tip style.

PKS-220 Operating Parameters

Return to Test Probe Selection or Tip Style Descriptions or Test Probe Features or the Ingun (UK) Home Page

UK and International Orders:
Ingun (UK) Ltd, Victoria House, Desborough Street, High Wycombe, Buckinghamshire, HP11 2NF, UK,
Tel: +44(0)1494 601096 Fax: +44(0)1494 601097
E-mail: probe@ingun.co.uk